How to Change a Faucet: Is It No Rest for the Wicked, or Easier Than You Think?
Changing a faucet yourself takes about 45–90 minutes and only basic tools — shut off the water, disconnect the supply lines, loosen the mounting nuts, drop…
Changing a faucet yourself takes about 45–90 minutes and only basic tools — shut off the water, disconnect the supply lines, loosen the mounting nuts, drop…
To install a pot filler with PEX, tap into your existing cold-water line, run a dedicated 1/2-inch PEX branch up inside the wall to a point roughly 20–24…
When installing a Delta shower valve rough-in, mount the valve body so the finished-wall plane falls between the “plaster ground” marks stamped on the…
To remove a Moen kitchen faucet aerator, wrap the tip of the spout in a cloth, twist the aerator counterclockwise (as you look up at it) by hand or with…
To install a new bathroom faucet, shut off the water supply, disconnect and remove the old faucet, drop the new one into the sink’s mounting holes, tighten…
To install a shower handle valve, shut off the water, remove the old handle and trim, either swap the cartridge in an existing valve body or sweat/press a…
To change a faucet handle, shut off the water, pop off the decorative cap, remove the set screw (usually a small Phillips or hex/Allen screw) under it, pull…
To remove a very old kitchen faucet, shut off the hot and cold supply valves, disconnect the supply lines, then reach up behind the sink and loosen the…
To replace bathtub faucet plumbing, shut off the water, remove the old spout and handles, unthread or unsweat the connections at the valve, then install a…
To remove a kitchen faucet with a U shaped bracket, shut off the water, disconnect the supply lines, then loosen the two mounting nuts or bolts that clamp…